Circular Saw Blades for Composites and Graphite
A blend of tungsten carbide and diamond grits on the continuous edge of these blades cuts hard, nonmetallic materials including composites and graphite. Use dry or with water or coolant (not included).
For technical drawings and 3-D models, click on a part number.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Edge Style | Each | |
2" Dia. | |||||||||
1/4" | Round | 0.12" | 23,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 0000000 | 000000 |
3" Dia. | |||||||||
1/4" | Round | 0.12" | 23,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 0000000 | 000000 |
3/8" | Round | 0.12" | 23,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 0000000 | 000000 |
4" Dia. | |||||||||
3/4" | Round | 0.12" | 23,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 00000000 | 000000 |
6" Dia. | |||||||||
5/8" | Round | 0.12" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 00000000 | 000000 |
7 1/4" Dia. | |||||||||
5/8" | Round | 0.12" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 00000000 | 000000 |
8" Dia. | |||||||||
5/8" | Round | 0.12" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 00000000 | 000000 |
Miter, Chop, and Table Saw Blades for Composites and Graphite
A blend of tungsten carbide and diamond grits on the continuous edge of this blade cuts hard, nonmetallic materials including composites and graphite. Use dry or with water or coolant (not included).
For technical drawings and 3-D models, click on a part number.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Edge Style | Each | |
10" Dia. | |||||||||
1" | Round | 0.125" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 00000000 | 0000000 |
Dremel-Compatible Blades for Composites and Fiberglass
A tungsten carbide grit edge cuts through abrasive materials such as composites and fiberglass.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Dia. | Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Edge Style | Each | |
3/4" | 1/8" | Round | 0.063" | 10,000 | Carbide | Steel | Continuous | 0000000 | 000000 |
1" | 1/4" | Round | 0.12" | 23,000 | Carbide | Steel | Continuous | 0000000 | 00000 |
1 1/4" | 1/8" | Round | 0.063" | 10,000 | Carbide | Steel | Continuous | 0000000 | 00000 |
1 1/2" | 1/4" | Round | 0.12" | 23,000 | Carbide | Steel | Continuous | 0000000 | 00000 |
1 3/4" | 1/4" | Round | 0.083" | 26,200 | Carbide | Steel | Continuous | 0000000 | 00000 |
Band Saw Blades for Fiberglass, Plastic, and Composites
The teeth on these steel blades are carbide tipped, so they'll last longer and produce a smoother cut than other band saw blades when cutting fiberglass, plastic, and composites. Tooth size and number per inch are constant throughout the blade, and the teeth are set to the left and right in a repeating pattern. They're also known as raker-set blades. Choose blades with more teeth per inch for a smooth finish; choose blades with fewer teeth per inch for fast, rough cutting. They have a welded seam and are ready to install on your saw.
Material | ||||||||
---|---|---|---|---|---|---|---|---|
Lg. | Teeth per Inch | For Material Thick. | For Use On | Tooth Style | Body | Tooth | Each | |
1/2" Wd. × 0.025" Thick. | ||||||||
44 7/8" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 0000000 |
64 1/2" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
64 1/2" | 6 | 1/2"-2" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
80" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
93" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
93" | 6 | 1/2"-2" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
150" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
154" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
154" | 6 | 1/2"-2" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
1/2" Wd. × 0.035" Thick. | ||||||||
93" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
3/4" Wd. × 0.032" Thick. | ||||||||
93" | 6 | 1/2"-2" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
120" | 6 | 1/2"-2" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
138" | 6 | 1/2"-2" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
3/4" Wd. × 0.035" Thick. | ||||||||
93" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
93" | 4 | 1"-4" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
120" | 4 | 1"-4" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
130 1/2" | 4 | 1"-4" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
133" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
150" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
1" Wd. × 0.035" Thick. | ||||||||
120" | 4 | 1"-4" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
130 1/2" | 4 | 1"-4" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
132" | 6 | 1/2"-2" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
138" | 4 | 1"-4" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
138" | 6 | 1/2"-2" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
162" | 6 | 1/2"-2" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
174" | 6 | 1/2"-2" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
1" Wd. × 0.05" Thick. | ||||||||
138" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
150" | 3 | 2"-6" | Fiberglass, Composites, Plastic | Constant Set | Steel | Carbide-Tipped Steel | 0000000 | 000000 |
Long-Life Hole Saws for Ceramics and Masonry
For 9/16"-1 3/16"
Dia. Saws
for 1 1/4" Dia.
Saws or Greater
The diamond-grit edge on these hole saws cuts more accurately, leaves a smoother finish, and lasts up to twice as long as carbide-grit-coated teeth. Saws are for use on reinforced plastic, Kevlar, stone, brick, and other abrasive materials with high silicon content. Attach them to a drill or drill press. An arbor with pilot drill (sold separately) is required. To cut ceramic tile, you must use a 1/4" carbide-tipped pilot drill.
For technical drawings and 3-D models, click on a part number.
Saws | Arbor with Pilot Drill with 1/4" Hex Shank | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Each | Each | Each | Each | |||||
1 5/8" Cutting Dp. | |||||||||||
9/16" | 1/2"-20 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
5/8" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
11/16" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3/4" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
13/16" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
7/8" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
15/16" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 1/16" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 1/8" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 3/16" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
Saws | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | ||||||
---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Each | Each | Each | ||||
1 5/8" Cutting Dp. | |||||||||
1 1/4" | 5/8"-18 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
1 5/16" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 3/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 1/2" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 5/8" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 3/4" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 7/8" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 1/8" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 1/4" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 3/8" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 1/2" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 5/8" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 3/4" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 7/8" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 1/4" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 3/8" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 1/2" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 5/8" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 3/4" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4 1/4" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4 1/2" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4 3/4" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
5" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
5 1/2" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
6" | 5/8"-18 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
Hole Saws for Ceramics and Masonry
For 9/16"-1 3/16"
Dia. Saws
for 1 1/4" Dia.
Saws or Greater
These saws have carbide-grit-coated teeth that cut ceramic tile, fiberglass, masonry, plastic, and composites. Attach them to a drill or drill press. An arbor with pilot drill (sold separately) is required.
Saws | Arbor with Pilot Drill with 1/4" Hex Shank | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Each | Each | Each | Each | |||||
1 3/8" Cutting Dp. | |||||||||||
5/8" | 1/2"-20 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
3/4" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
7/8" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 1/8" | 1/2"-20 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
Saws | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | ||||||
---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Each | Each | Each | ||||
1 3/8" Cutting Dp. | |||||||||
1 1/4" | 5/8"-18 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
1 3/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 1/2" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 3/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 7/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 1/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 1/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 3/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 1/2" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
2 3/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 1/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 3/8" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
3 3/4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
4 1/2" | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
Hole Saw Kits for Ceramics and Masonry
The saws in these kits have carbide-grit-coated teeth that cut ceramic tile, fiberglass, masonry, plastic, and composites. Attach hole saws to a drill or drill press with the included arbors.
No. of Saws | Dia. | Cutting Dp. | Includes | Each | |
9 | 3/4", 7/8", 1 1/8", 1 3/8", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 1 15/16" | Plastic Case, 3/8" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, 7/16" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill | 0000000 | 0000000 |