We will reply to your message within an hour.
More
For light duty spray-down applications, attach these wash guns to any standard garden hose.
These durable wash guns are typically used for frequent washdowns and cleanup.
The powerful combination of air and water creates a high-velocity, atomized spray without needing high pressure. These guns also can be used to siphon.
These wash guns have a high maximum pressure, so use them with pressure washers and high-pressure spray systems.
Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose.
Use these guns to clean as well as apply chemicals and solvents.
With a high maximum pressure and quick-disconnect nozzle connection, these wash guns work with pressure washers and high-pressure spray systems and it’s easy to swap out their nozzles.
Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.
Combine the power of steam and detergent—siphon detergent from a drum and use the control panel to regulate the steam/detergent mixture and change the temperature and flow rate.
Clean and sanitize surfaces with the power of steam—with or without detergents and other chemicals.
Connect these cleaners to existing steam lines to remove dirt, grease, and heavy oils from most surfaces.
Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.
These premium nozzles are engineered for the most efficient airflow consumption.
Made from rubber, these nozzles won’t scratch or damage sensitive workpieces.
Attach to your blowgun to direct airflow.
Control consumption and noise by adjusting the airflow.
Extend these telescoping nozzles to increase your reach.
The extra length allows access into hard-to-reach areas.
These needle-style nozzles force air to a precise pinpoint.
Focus air with pinpoint precision.
The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.
These nozzles are made of FDA-listed materials.
Adjust airflow to control consumption and noise.
Air blows out of these nozzles at a right angle in a wide pattern, distributing air over a wider area than focused-airflow nozzles.
At less than 2" long and with a wide airflow pattern, these nozzles are ideal for tight spaces where you need to distribute air over a wider area than a focused-airflow nozzle.
Air blows out of these flat nozzles in a wide pattern at a 90° angle from the inlet, distributing air over a wider area than focused-airflow nozzles. They’re FDA compliant 21 CFR 110.40 for use in the food industry.
Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.
As compressed air flows through these nozzles, they rotate to efficiently and evenly blow off large areas.
Convert your blowgun to a spray gun. These nozzles spray air and liquids at the same time.
Nozzles are attached to a flexible hose that bends and holds its shape until you reposition it.
The magnetic base mounts to your work surface and has a control valve for adjusting airflow.
Choose a base, hose, and nozzle for a custom setup.
Shaped to fit into extremely tight spaces, these nozzles can be used to remove parts from molds. Tap the wedge into position, attach the nozzle to a blowgun, and activate the airflow to release the part.
Often used for simultaneously spot cooling and blowing parts, these nozzles cool compressed air without electricity or refrigerants.
Blow debris and sweep it away with the built-in brush.
Turn your blowgun into a scraper to remove and blow away debris at the same time.
Also known as siphon guns, these spray air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.
Twist the barrel to adjust water flow.
There’s no shut-off valve on these nozzles, so water instantly flows.
Use the lever to turn water flow on and off.
These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles.
Control the flow while dispensing diesel fuel with these nozzles.
Adjust the flow while dispensing liquid chemicals.
Nozzles allow you to control the flow while dispensing hydraulic fluid.
Dispense and control the flow of coolant with these nozzles.
Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.
Connect these swivels to the threaded end of your dispensing hose. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.
These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.
The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.
Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.
These nozzles have replaceable tips that are removable with a quarter-turn.
Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.
A check valve prevents the nozzle from dripping when it is turned off. Spray tips can be removed for cleaning and replacement.
A quick-disconnect hose fitting on these nozzles means you can remove and replace them easily to change spray patterns and angles.
A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.
Particles in liquid won’t clog these nozzles because of their unique internal and external design.
These nozzles project their spray at a right angle from their threaded connection.
Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.
Save time in applications where you often need to replace worn nozzles. These nozzles consist of a base and a nozzle, so you can replace the tip with just a quarter turn.
The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.
With a unique internal and external design, these nozzles let particles in liquid pass through instead of clogging.
By circulating their spray, these nozzles clean faster with more even coverage and less water than stationary tank-washing nozzles.
Internal gears create controlled motion as fluid moves through these nozzles, maintaining speed and producing large droplets to efficiently clean heavily soiled or large-diameter tanks.
Use these nozzles with detergent that’s diluted in water to create a rotating, multi-directional foam spray for effectively rinsing tanks, drums, and small vessels.
To effectively rinse tanks, drums, and small vessels, these nozzles spray in multiple directions.
Avoid clogs while rinsing tanks, drums, and small vessels. These nozzles have a unique internal and external design, so particles in liquid pass through instead of getting stuck.
Certified by 3-A to meet sanitary design standards, these nozzles have a 360° spray pattern to effectively rinse tanks and vessels in food, beverage, and pharmaceutical environments.
A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.
Mixing compressed air and liquid together, these nozzles create an ultra-fine, uniform spray without using high pressures. Also known as air-atomizing nozzles, they make droplets that are less than half the size of other fogging nozzles.
These nozzles provide a uniform distribution of droplets.
Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.
A check valve prevents the nozzle from dripping when it is turned off.
Create small, atomized spray droplets for cooling, moistening, and humidifying applications. These nozzles have a check valve that prevents dripping when they’re turned off
A unique internal and external design lets particles in liquid pass through instead of clogging, leading to higher volumes of mist.
Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.
These nozzles produce a flat, thin spray pattern.
No need to juggle multiple nozzles with different spray angles—just turn the cover to adjust the spray angle from 0° to 80°.
The superior cleaning ability of a solid stream has been combined with rotating spray action for excellent coverage.
Push the nozzle out for lower pressures and pull it back for higher pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.
Instead of swapping between nozzles, turn the cover on these nozzles to change their spray angle. They have quick-disconnect couplings for easy detachment.
No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.
Combining rotation with a solid stream, these nozzles spray in a 25° hollow cone shape to cover a wide area. They’re easy to remove thanks to their quick-disconnect hose connection.
Specifically designed for steam, these nozzles direct steam better than standard spray nozzles.
FM approved for use in fire-protection applications, these nozzles produce a heavy, coarse spray to quickly put out fires.
Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.
Kits contain lengths of hose, nozzles, valves, and caps.
Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.
Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.
Kit contains lengths of hose, nozzles, connectors, and assembly pliers.
Use with Loc-Line hose to assemble and disassemble components.
Use with Snap-Loc hose to assemble and disassemble components.
This hose is made of steel.
These nozzles handle coolant pressure up to 150 psi.
For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.
Use as a lever to adjust the angle of coolant streams.
The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.
For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi.
Press these nozzles into unthreaded holes.
Draw coolant from your existing tank.
These dispensers have a reservoir for recirculating coolant.
Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.
These dispensers have a reservoir and controls for coolant flow.
Replace messy mist coolant dispensers—these convert compressed air into a stream of cold air. They can be used in applications where liquid coolant can't.
Deliver a small, controlled amount of coolant to a workpiece.
Snap these adapters into the ball-socket connections on CNC machines to connect threaded coolant hose and nozzles to coolant supply ports.
Move grease-dispensing guns in any direction without kinking the outlet hose.
Provide a connection for hose cocks, needle valves, and nozzles by attaching these flanges and turrets to your supply pipe.
Attach these nozzles to your high-pressure water line to flush grit and grime out of blocked pipes.