Steel Spiral Pins | McMaster-Carr

Filter by

System of Measurement

Diameter

Length

Shaft Type

Material

Fastener Head Type

Pin Type

Minimum Hardness

Thread Size

DFARS Compliance

End Type

REACH Compliance

Specifications Met

Breaking Strength

RoHS Compliance

Tolerance Rating

End Shape

Construction

For Use With

Performance

Steel Grade

USMCA Qualifying

Forward

How can we improve?

45 Products

Vented Pull-Out Dowel Pins

Insert and remove from blind holes with less effort than pins that aren't vented. The vent relieves trapped air, so pressure doesn't create resistance as you install the pin. Because they have a tapped end, you can thread in a screw and pull the pin out with a removal tool (sold separately). You can also pull using pliers, but there’s more risk of damaging the hole.

Spiral Shaft

For a more secure hold under vibration than flat-shaft pins, the spiral makes 360° contact with the hole.

High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.

Puller Handle—A complete removal tool requires a puller handle and a tip that fits your pin diameter. To use, thread a tip into the puller handle and then place the tip over the screw in your pin. Slide the weight along the handle to pull the pin out.

	Dia. Tolerance	Thread Size	Min. Hardness	Breaking Strength, lbf	Specs. Met		Each
High-Strength Alloy Steel





			1/4" Diameter
			3/4"	0.0001" to 0.0003"	8-32	Rockwell C47	6,400	ASME B18.8.2	000000000	00000
			1"	0.0001" to 0.0003"	8-32	Rockwell C47	6,400	ASME B18.8.2	000000000	0000
			1 1/4"	0.0001" to 0.0003"	8-32	Rockwell C47	6,400	ASME B18.8.2	000000000	0000
			1 1/2"	0.0001" to 0.0003"	8-32	Rockwell C47	6,400	ASME B18.8.2	000000000	0000
			2"	0.0001" to 0.0003"	8-32	Rockwell C47	6,400	ASME B18.8.2	000000000	0000
			2 1/2"	0.0001" to 0.0003"	8-32	Rockwell C47	6,400	ASME B18.8.2	000000000	0000



					5/16" Diameter
					3/4"	0.0001" to 0.0003"	10-32	Rockwell C47	10,000	ASME B18.8.2	000000000	0000
					1"	0.0001" to 0.0003"	10-32	Rockwell C47	10,000	ASME B18.8.2	000000000	0000
					1 1/4"	0.0001" to 0.0003"	10-32	Rockwell C47	10,000	ASME B18.8.2	000000000	0000
					1 1/2"	0.0001" to 0.0003"	10-32	Rockwell C47	10,000	ASME B18.8.2	000000000	0000
					2"	0.0001" to 0.0003"	10-32	Rockwell C47	10,000	ASME B18.8.2	000000000	0000
					2 1/2"	0.0001" to 0.0003"	10-32	Rockwell C47	10,000	ASME B18.8.2	000000000	0000



							3/8" Diameter
							1"	0.0001" to 0.0003"	10-32	Rockwell C47	14,300	ASME B18.8.2	000000000	0000
							1 1/4"	0.0001" to 0.0003"	10-32	Rockwell C47	14,300	ASME B18.8.2	000000000	0000
							1 1/2"	0.0001" to 0.0003"	10-32	Rockwell C47	14,300	ASME B18.8.2	000000000	0000
							1 3/4"	0.0001" to 0.0003"	10-32	Rockwell C47	14,300	ASME B18.8.2	000000000	0000
							2"	0.0001" to 0.0003"	10-32	Rockwell C47	14,300	ASME B18.8.2	000000000	0000
							2 1/4"	0.0001" to 0.0003"	10-32	Rockwell C47	14,300	ASME B18.8.2	000000000	0000
							2 1/2"	0.0001" to 0.0003"	10-32	Rockwell C47	14,300	ASME B18.8.2	000000000	0000
							3"	0.0001" to 0.0003"	10-32	Rockwell C47	14,300	ASME B18.8.2	000000000	0000



									1/2" Diameter
									1"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	25,500	ASME B18.8.2	000000000	0000
									1 1/4"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	25,500	ASME B18.8.2	000000000	0000
									1 1/2"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	25,500	ASME B18.8.2	000000000	0000
									1 3/4"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	25,500	ASME B18.8.2	000000000	0000
									2"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	25,500	ASME B18.8.2	000000000	0000
									2 1/4"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	25,500	ASME B18.8.2	000000000	0000
									2 1/2"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	25,500	ASME B18.8.2	000000000	0000
									3"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	25,500	ASME B18.8.2	000000000	0000
									3 1/2"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	25,500	ASME B18.8.2	000000000	0000



											5/8" Diameter
											1 1/2"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	39,000	ASME B18.8.2	000000000	0000
											2"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	39,000	ASME B18.8.2	000000000	0000
											2 1/4"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	39,000	ASME B18.8.2	000000000	0000
											2 1/2"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	39,000	ASME B18.8.2	000000000	00000
											3"	0.0001" to 0.0003"	1/4"-20	Rockwell C47	39,000	ASME B18.8.2	000000000	00000



													3/4" Diameter
													2"	0.0001" to 0.0003"	5/16"-18	Rockwell C47	57,000	ASME B18.8.2	000000000	00000
													2 1/2"	0.0001" to 0.0003"	5/16"-18	Rockwell C47	57,000	ASME B18.8.2	000000000	00000
													3"	0.0001" to 0.0003"	5/16"-18	Rockwell C47	57,000	ASME B18.8.2	000000000	00000
													4"	0.0001" to 0.0003"	5/16"-18	Rockwell C47	57,000	ASME B18.8.2	000000000	00000



	1" Diameter
	2"												0.0001" to 0.0003"	3/8"-16	Rockwell C47	102,000	ASME B18.8.2	000000000	00000
	3"	0.0001" to 0.0003"											3/8"-16	Rockwell C47	102,000	ASME B18.8.2	000000000	00000
	4"	0.0001" to 0.0003"											3/8"-16	Rockwell C47	102,000	ASME B18.8.2	000000000	00000