Drill Bit Decimal Size Equivalents
More
About Drill Bits
More
Ball Guides for Flexible-Shaft Drill Bits
Keep flexible-shaft drill bits centered between studs and drywall.
For Drill Bit | |||||||
---|---|---|---|---|---|---|---|
Material | Shank Type | Shank Size | Shaft Size | Dia. | No. of Guides | Each | |
Plastic | Round | 3/16" | 3/16" | 1 1/2", 2" | 2 | 000000 | 000000 |
Drill Bit Cases
Store and organize drill bits so they stay in good working condition and don't go missing. These cases have individually marked holes for each size in your set.
Plastic cases have screw-on lids to block out moisture. Compared to steel cases, they're lighter, and they resist rust and dents. Clip them onto your belt to take with you on the job.
For technical drawings and 3-D models, click on a part number.
Magnetic Pouches for Drills
This pouch fits onto most hand-held power drills and impact drivers. It has a magnetic panel on the front that can hold bits and fasteners for easy access.
Pocket | |||||||||
---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Wd. | Ht. | Number of Compartments | Material | Color | Includes | Each | |
For Inch, Metric, Letter, Wire Gauge Drill Bits | |||||||||
4" | 3" | 3 3/4"-4" | 3 1/4"-3 1/2" | 1 | Nylon Fabric | Black | Hook-and-Loop Strap | 0000000 | 000000 |
Drilling-Debris Containment Disposable Bubbles
Make cleanup after drilling easy by containing chips and dust in these disposable bubbles. Use the adhesive backing to stick the bubble to the wall and pull the label to inflate. Drill through the bubble to the wall; then gently pull it off the surface to dispose.
Magnetic Chip Catchers for Drilling Metal
Magnets on these catchers attach to metal surfaces and contain metal chips created during drilling.
Plastic catchers can be mounted on top or underneath a metal surface.
OD | ID | Ht. | No. of Magnets | Each | |
3" | 2" | 2" | 10 | 0000000 | 000000 |
Vacuum Attachments for Drilling-Dust Containment
Use one of these attachments with a vacuum to suck up concrete dust during drilling to help meet OSHA standards for silica dust exposure. Each attachment has two air chambers—one chamber sucks up the dust, and the other maintains suction on the wall. The included vacuum hose adapter allows the attachment to be used with 2 1/2" vacuum hose.
Tap and Drill Bit Stands
Keep taps and drill bits organized. All holes are labeled with sizes. Taps and drill bits are not included.
No. of Taps Stored | Holds Tap Sizes | No. of Drill Bits Stored | Holds Drill Bit Sizes | Lg. | Wd. | Ht. | Material | Each | |
For Taps and Drill Bits | |||||||||
---|---|---|---|---|---|---|---|---|---|
16 | One each of M2, M3; Two each of M4, M5, M6, M8, M10, M12, M14 | 25 | Two each of 3.3 mm, 4.5 mm, 12 mm; One each of 1.8 mm, 2.4 mm, 2.5 mm, 3.4 mm, 4.2 mm, 5 mm, 5.25 mm, 5.5 mm, 6.6 mm, 6.8 mm; 7 mm, 8.5 mm, 8.8 mm, 9 mm, 10.2 mm, 10.8 mm, 12.5 mm, 14 mm, 16 mm | 7" | 4 1/2" | 1 11/16" | Plastic | 0000000 | 000000 |
26 | Two each of Nos. 2, 3, 4, 5, 6, 8, 10, 12; Two each of 1/4", 5/16", 3/8", 7/16", 1/2" | 39 | Two each of 50 ga., 33 ga., 29 ga.; One each of 47 ga., 45 ga., 44 ga., 43 ga., 42 ga., 39 ga.; 38 ga., 37 ga., 36 ga., 30 ga., 28 ga., 25 ga., 21 ga., 19 ga., 16 ga., 14 ga., 11 ga., 7 ga., 3 ga.; One each of F, I, Q, U; Two of 5/16"; One each of 7/32", 1/4", 3/8", 25/64", 27/64", 7/16", 29/64", 1/2" | 7 3/8" | 4 11/16" | 1 11/16" | Plastic | 0000000 | 00000 |
Bit Organizing Trays
Store a variety of sizes and styles of bits and adapters in one compact tray.
For Number of Bits | For Min. Drawer Ht. | Lg. | Wd. | Ht. | Material | Each | |
90 | 2 3/4" | 15" | 3 5/8" | 1 1/4" | Plastic | 000000 | 000000 |
Bit Organizing Cases
Fit these small cases comfortably in your pocket.
For Number of Bits | For Bit Hex Shank Size | Lg. | Wd. | Ht. | Material | Each | |
9 | 1/4" | 4 1/2" | 2 1/4" | 1" | Plastic | 0000000 | 00000 |
Bit Organizing Caddies
Keep these caddies in your tool drawer or take them with you.
Magnetic Bit Organizing Caddies
Mount the magnetic base to walls, cabinets, and other steel surfaces.
For Number of Bits | For Bit Hex Shank Size | Lg. | Wd. | Ht. | Material | Mount Type | Each | |
37 | 1/4" | 7" | 1 1/2" | 1" | Plastic | Magnetic Base | 00000000 | 000000 |
Clamp-On Drill Guides
Drill precise holes without building a fixture. Clamp the jig onto your material and lift and turn the turret to select the hole size you need. Use the graduations to set the jig to the centerline of your workpiece.
For Drill Bit Size | For Drill Bit Size Decimal Equivalent | Max. Opening Wd. | Lg. | Wd. | Ht. | Material | Each | |
3/16", 1/4", 5/16", 3/8", 7/16", 1/2" | 0.1875", 0.25", 0.3125", 0.375", 0.4375", 0.5" | 4" | 7 1/8" | 3 1/2" | 2 1/8" | Steel and Nylon Plastic | 0000000 | 000000 |
Multi-Compartment Belt Pouches
Slip these pouches onto your belt to keep several tools within reach.
Style L and Style N have a magnetic panel on the front that can hold bits and fasteners for easy access.