About Structural Adhesives
More
About Paint and Protective Coatings
More
Wood Glue
Bond both soft and hard wood. This glue can be sanded and painted after reaching full strength.
Waterproof Wood Glue
In addition to being waterproof, this glue is made of FDA listed materials. It bonds soft and hard woods, and can be sanded and painted after reaching full strength.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Max. Temp., °F | Color | Specifications Met | Each | |
32 fl. oz. | Jug | 10 min. | 25 min. | Thick Liquid | 120° | Beige | ANSI/HPVA HP-1 Type 1, FDA Compliant 21 CFR 175.105 | 0000000 | 000000 |
1 gal. | Jug | 10 min. | 25 min. | Thick Liquid | 120° | Beige | ANSI/HPVA HP-1 Type 1, FDA Compliant 21 CFR 175.105 | 0000000 | 00000 |
Water-Resistant Wood Glue
This glue withstands limited exposure to water. It bonds soft and hard woods, and it can be sanded and painted after reaching full strength.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Max. Temp., °F | Color | Specifications Met | Each | |
1 gal. | Jug | 10 min. | 24 hrs. | Thick Liquid | 140° | Beige | ANSI/HPVA HP-1 Type 1 | 0000000 | 000000 |
Glue
Use these glues for general purpose bonding and repairs.
Elmer's glue is white, but dries clear.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Max. Temp., °F | Color | For Joining | Each | |
1 gal. | Jug | 10 sec. | 24 hrs. | 150° | Clear | Cardboard, Wood | 000000 | 000000 |
Quick-Set Contact Adhesives
Bonds reach full strength in 10 minutes. Apply this adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, gal. | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | For Joining | Color | Each | |
3M Adhesives | ||||||||||||
1000NF | 1 | Jug | 60 sec. | 10 min. | 400 | Thin Liquid | 750 | 60° to 80° | Fabric, Foam, Wood | Purple | 00000000 | 0000000 |
Clean-Away Coatings for Metal
Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.
Wax coatings meet MIL-C-16173 for corrosion-resistant compounds that dry to thin, easily removable films. Grade 2 coatings dry to a slightly tacky, self-healing film that lubricates as it protects.
Coatings in a jug can be dipped, brushed, or sprayed.
Coatings that cannot be sold to the regions listed are restricted by product labeling requirements or exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Max. Protection Time | Dry Time | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. | Mfr. Model No. | Size, gal. | Indoor, mo. | Outdoor, mo. | Touch | Overall, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | Application Temp. Range, °F | Specifications Met | For Use On | Color | Cannot Be Sold To | 1-11 | 12-Up | |
Solvent Based Wax Coatings | ||||||||||||||||
LPS | LPS #3 | 1 | 24 | 6 | 3.5 hrs. | 24 | 380 sq. ft. @ 1 mil | 175° | 0° to 70° | MIL-C-16173 Grade 2 | Steel, Iron | Transparent Yellow | Los Angeles County, CA; Orange County, CA; Outside United States; Riverside County, CA; San Bernardino County, CA | 00000000 | 0000000 | 0000000 |
Food Industry Clean-Away Coatings for Metal
These coatings are often used in food-processing areas. They form a tacky film that provides long-lasting protection against rust and corrosion. Coatings can be dipped, brushed, or sprayed onto surfaces and then removed with an alkaline cleaner.
Max. Protection Time | |||||||||
---|---|---|---|---|---|---|---|---|---|
Container Size | Indoor, mo. | Outdoor, mo. | Composition | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color | Each | |
1 | 12 | 3 | Water Based | 180° | 35° to 90° | Steel, Iron | Clear | 00000000 | 000000 |
Low-Odor Abrasion-Resistant Clean-Away Coatings for Metal
These low-odor coatings form a waxy film similar to lube oil, so parts can remain coated for assembly. They can be dipped, brushed, or sprayed onto surfaces and then removed with an alkaline cleaner.
Max. Protection Time | Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Indoor, mo. | Outdoor, mo. | Composition | Touch, min. | Overall, min. | Approx. Coverage @ Thick. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color | Each | |
1 | 24 | 12 | Water Based | 10 | 15 | 650 sq. ft. @ 1 mil | 160° | 50° to 150° | Steel, Iron | Transparent Yellow | 0000000 | 000000 |
Abrasion-Resistant Clean-Away Coatings for Metal
A hard waxy film protects items from abrasion. Coatings provide long-lasting protection against rust and corrosion. They can be dipped, brushed, or sprayed onto surfaces and then removed with an alkaline cleaner.
Container | Max. Protection Time | Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Indoor, mo. | Outdoor, mo. | Composition | Touch, min. | Overall, min. | Approx. Coverage @ Thick. | Max. Temp., °F | Application Temp. Range, °F | Specifications Met | For Use On | Color | Each | |
1 | Jug | 60 | 36 | Water Based | 10 | 30 | 650 sq. ft. @ 1 mil | 180° | 50° to 150° | MIL-C-16173 Grade 1 | Steel, Iron | Transparent Yellow | 0000000 | 000000 |
Food Industry Wipe-Down Coatings for Metal
These coatings are NSF registered H1 for incidental food contact. Designed to protect food-processing equipment from corrosion after washdowns, use them to seal metal surfaces, resist moisture, and lubricate moving parts between processes.
Peel-Away Coatings for Metal
These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration. Water-based coatings are low odor, so they’re a good option for use in enclosed areas. Apply with a brush, roller, or sprayer.
Container | Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Max. Indoor Protection Time, mo. | Composition | Touch | Overall, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | For Use On | Color | Each | |
1 | Jug | 48 | Water Based | 30 min. | 8 | 750 sq. ft. @ 1 mil | 150° | Aluminum, Steel, Ceramic, Glass, Concrete, Asphalt, Wood | Clear | 0000000 | 000000 |
UV-Resistant Coatings for Fabric
Stop fabric from fading in the sun. These coatings also protect against spots, spills, and stains.
Container | Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Composition | Approx. Coverage, sq. ft. | Touch, hrs. | Overall, hrs. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color | Each | |
1 gal. | Jug | Solvent Based | 1,500 | 4 | 72 | 120° | 60° to 110° | Fabric | Clear | 00000000 | 000000 |
Flame-Retardant Coatings for Wood
Use these coatings on structural lumber, decking, and wood shingles. Apply with a brush, pad, roller, or sprayer. Reapply every five years on exterior wood; coatings protect interior wood indefinitely. Once fully cured, they can be painted over with water-based paint.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Composition | Approx. Coverage, sq. ft. | Touch, hrs. | Overall., hrs. | Application Temp. Range, °F | Max. Temp., °F | For Use On | Color | Each | |
1 | Water Based | 125 | 2 | 48 | 40° to 130° | 130° | Wood | Clear | 000000 | 000000 |
Coatings for Masonry
Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water. Use them in exterior, above-grade vertical surfaces to minimize deterioration and to prevent salt deposits and surface stains. Apply with a brush or sprayer.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Composition | Approx. Coverage @ Thick. | Touch, min. | Overall, hrs. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color (Appearance) | Each | |
1 | Water Based | 210 sq. ft. @ 1 mil | 30 | 72 | 90° | 50° to 90° | Masonry, Concrete, Stone | Clear (Flat) | 000000 | 000000 |
Concrete Floor Cleaners and Surface Preparers
Remove grease, oil, and dirt from your concrete floors.
Etching cleaners prepare unfinished concrete for coating and patching. Often used in warehouses, light manufacturing facilities, and machine shops, they leave a rough, etched finish for strong coating adhesion. Pour these cleaners onto your floor and scrub with a stiff-bristle brush or broom.
Non-etching cleaners are primarily used to clean finished concrete. They leave a smooth finish that’s ready for applying a protective coating if desired. They do not leave any etched markings, which can weaken concrete surfaces. Dilute these cleaners with water. Apply them to your floors with a mop or automatic scrubber.
Container | Each | Package | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Size, gal. | Composition | Approx. Coverage, sq. ft. | Application Temp. Range, °F | For Use On | For Surface Type | For Removing | Each | Pkg. Qty. | Pkg. | ||
Etching | ||||||||||||
Liquid | ||||||||||||
Jug | 1 | Water Based | 400 | 60° to 100° | Concrete | Unfinished | Dirt, Grease/Oil | 0000000 | 000000 | __ | 000000 | 00 |
Non-Etching | ||||||||||||
Liquid Concentrate | ||||||||||||
Jug | 1 | Water Based | 500 | 40° to 80° | Concrete | Finished | Dirt, Grease/Oil | 00000000 | 00000 | 4 | 00000000 | 0000000 |
Surface Fillers
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Devcon Plastic Steel® Liquid can repair areas where brazing and welding is impractical.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Plastic Steel® Liquid | |||||||||||||
10230 | 25 lbs. | Pail, Jug | 90 | 16 hrs. | Thick Liquid | 9:1 | 52 sq. in. @ 1/4" | 55° to 250° | Dark Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000000 |
Coolant-Resistant Surface Fillers
Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, min. | Consistency | Temp. Range, °F | Color | For Use On | Each | |
16 | Jug | 7 | 10 | Thick Liquid | Not Rated to 500° | Brown | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Galvanized Steel, Galvanized Iron, Titanium, Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, PTFE Plastic, Polyethylene Plastic, Polypropylene Plastic | 0000000 | 000000 |
Low-Temperature Concrete Patching Compounds
Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds. Once cured, they withstand impact, abrasion, and chemicals. The size listed is the combined total of the two parts.
Polyurea compounds are ready for foot traffic in ten minutes and vehicle traffic in 30 minutes. They are self-leveling, but can be mixed with sand (not included) and applied with a trowel.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Application Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Polyurea | ||||||||||||||
1 gal. | Jug | 5 | 30 min. | Thin Liquid | 1:1 | 4 1/2 sq. ft. @ 1/4" | 1" | Yes | -5° to 90° | Gray | Drill, Sand | Concrete, Stone | 00000000 | 0000000 |
1 gal. | Jug | 5 | 30 min. | Thin Liquid | 1:1 | 4 1/2 sq. ft. @ 1/4" | 1" | Yes | -5° to 90° | Red | Drill, Sand | Concrete, Stone | 0000000 | 000000 |
Asphalt Crack Fillers
These crack fillers come in an easy-to-pour jug for filling cracks in asphalt up to 1/2" wide. They’re ready for traffic in 2 to 5 days.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Begins to Harden, min. | Reaches Full Strength, days | Consistency | For Max. Crack Wd. | For Use Outdoors | Application Temp. Range, °F | Color | For Use On | Each | |
1 | Jug | 30 | 2 | Thick Liquid | 1/2" | Yes | 55° to 100° | Black | Asphalt | 0000000 | 000000 |
Surface-Preparation Cleaners
Often used to prepare parts for painting or powder coating, these water-based cleaners remove dirt, grease, metal residue, and mold-release lubricants. You can also use them to clean stainless steel prior to passivation. Free of fragrances and dyes, they rinse clean without leaving a residue. They contain corrosion inhibitors for long-lasting surface protection. Clean parts by soaking, scrubbing, or using a pressure washer.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Type | Size, gal. | Composition | Harshness | For Use On | For Removing | Features | Each | |
Liquid Concentrate | ||||||||
Jug | 5 | Water Based | Harsh | Ceramic, Fiberglass, Galvanized Steel, Iron, Plastic, Porcelain, Rubber, Stainless Steel, Steel | Dirt, Grease/Oil, Ink, Wax | Low Foaming | 0000000 | 0000000 |